Showing 1–12 of 31 results

Show sidebar

AMMIT rta 25

د.إ75.00
The Ammit 25 is a larger version of the original Ammit, with several distinct improvements. Compatible with higher wattage of up to 70w and a performance boost in both vapor and flavor production.

Blitz Enterprises x TVP FP 30mm RTA

د.إ190.00
Blitz Enterprises x TVP FP 30mm RTA The Blitz Enterprises x TVP FP 30mm RTA is a massive rebuildable atomizer with dual post ceramic

Blitzen rta

د.إ180.00 د.إ140.00
THE BLITZEN IS A 24MM RTA THAT IS DESIGNED TO ACHIEVE MAXIMUM VAPOR PRODUCTION WHILE PROVIDING OUTSTANDING FLAVOR IN A LEAK-RESISTANT FASHION. THE POSTLESS BUILD DECK ALLOWS A MUCH EASIER COIL BUILD AND IS CONNECTED TO THE BASE TO ALLOW CONVENIENT ACCESS TO THE DECK. BY COMBINING MAXIMUM VAPOR PRODUCTION WITH SMOOTH AIRFLOW AND OUTSTANDING FLAVOR, THE BLITZEN IS EASILY A MUST HAVE RTA FOR 2018.
Close

Bravo rta

د.إ75.00
Wotofo Bravo RTA Tank Atomizer is a new tank design by Aaron Hart & Wotofo, features 25mm in diameter with incredible knurling to easily remove top cap. The Bravo RTA has 4.5ml juice capacity with regular glass, as well as 6ml with bubble glass, with dual adjustable airflow control system for nice flavor.

Coil Art Salt 18mm MTL RTA

د.إ145.00
Coil Art Salt 18mm MTL RTA Coil Art introduces the Salt 18mm MTL RTA, a rebuildable tank atomizer with a single coil build deck, seven levels of adjustable airflow, a maximum juice capacity of 3.5ml and designed for use with both low nicotine E-Liquids and Nicotine Salt E-Liquids. The Coil Art Salt 18mm MTL RTA has a pre-installed glass tank with a capacity of 2.0ml and can be expanded with an included 3.5ml bubble glass tank. The dual fill ports can be accessed through a knurled top cap that is threaded to the top of the tank. The Coil Art Salt has a stainless steel build deck with two single terminal posts with top mounted hex screws and accommodates single coil builds. This package comes with three sets of pre-built coils: 0.65 ohm Fused Claptons to be used at 20 to 35W, 1.15 ohm Ni80 for low nicotine salts to be used at 10W to 20W, and a 1.6 ohm Ni80 for high nicotine salts to be used at 6W to 15W. The build deck has two wicking ports that are 3mm by 5mm wide. The Coil Art Salt 18mm MTL RTA has 7 air holes built into the body with diameters of 0.6, 0.8, 1.0, 1.5, 1.8, and 2.0mm that can be changed by rotating the knurled adjustment ring. The included mouth-to-lung 510 drip tip has a 3mm bore. The Salt RTA has a gold plated 510 contact and is made of high quality 304 Stainless Steel and Glass. The Coil Art Salt 18mm MTL RTA is a versatile mouth-to-lung rebuildable tank that comes with an exceptional set of accessories for those looking to try out MTL Rebuildable Atomizers. Quick Links: Building Materials New Box Mods Monthly Featured E-Liquids Product Features: 18mm Diameter 2.0ml Standard Tank Capacity Threaded Top Fill Knurled Texture Two Large Fill Ports 3.5ml Bubble Glass Tank Capacity Stainless Steel Dual Post Build Deck Single Coil Design Dual Terminal Top Mounted Hex Screws 2mm Each Terminal Dual Wicking Ports 3mm by 5mm PEEK Insulation Single Adjustable Bottom Airslot 7 Level Airflow Adjustment 0.6 / 0.8 / 1.0 / 1.2 / 1.5 / 1.8 / 2.0mm 3mm Bore Delrin 510 Drip Tip 304 Stainless Steel and Glass Construction Gold Plated 510 Contact Product Specifications: 18mm by 47mm Product Includes: One Coil Art Salt RTA One 2.0ml Glass Tank Section (Pre-Installed) One 3.5ml Bubble Glass Tank Section One Accessories Bag One Bag of Pre-Cut Cotton Two Pre-built 0.65 ohm Fused Clapton 20W to 35W Two Pre-built 1.15 ohm Ni80 Coils 10W to 20W Two Pre-built 1.6 ohm Ni80 Coils 6W to 15W Spare O-Ring and Screw Pack One Hex Key Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling. Advanced User Item. Use At Your Own Risk! NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by VaporDNA and any and all of VaporDNA's parent and subsidiary companies. There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). VaporDNA™ and any and all of VaporDNA™'s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. VaporDNA™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
Close

CP rta

د.إ75.00
Stainless steel + glass construction Removable wide bore drip tip Innovative top refilling design for excellent flavor 3.5ml juice capacity Dual posts build deck design for coil build Adjustable bottom direct airflow (dual slotted air slots) Brass center screw 510 threading connection 24mm overall diameter

Digiflavor Siren 2 GTA MTL

د.إ150.00 د.إ130.00
Main Features:  ● Chamber closer to drip tip provides intense flavor ● 9 airflow adjustment options for the perfect restriction

Digiflavor Siren V2 24 MTL GTA

د.إ150.00 د.إ120.00
DIGIFLAVOR Siren 2 MTL GTA 24MM Edition is a GTA specially made for MTL ( mouth to the lung ) vaping, which

GeekVape Zeus X RTA

د.إ150.00
The Geek Vape ZEUS X RTA is the upgraded rendition of the appraised Zeus series, deploying an elevated postless build design to
Close

GEMZ PRIME MOVER RTA

د.إ75.00
Gemz Prime Mover RTA adopts press and rotate design for the easy top refill. Interchangeable drip tip will display different appearances. Beveled dual posts with a single hole design are convenient for the customer to DIY. Main features: ● Diameter: 2.4cm ● Capacity: 3ml ● Thread: 510 ● Adjustable bottom airflow system

HELLVAPE DEAD RABBIT 25MM RTA

د.إ170.00 د.إ140.00
The HellVape Dead Rabbit 25mm RTA is the resulting brainchild between HellVape and Vapin’ Heathen, presenting an impressive expandable juice

Kaiser rta

د.إ175.00 د.إ140.00
The Authentic Smokjoy Kaiser RTA is constructed from stainless steel in 24mm diameter. It has convenient top fill design and 3ml e-liquid capacity. The deck is floating with stair style dual posts, which provide much space for easy coil build. The Kaiser has both top and bottom airflow design and comes with wide bore ultem drip tip. Stainless steel construction Capacity: 3ml Convenient top fill design Floating build deck for easy building Dual post stair style posts Top mounted screws Top airflow Bottom adjustable airflow Hybrid safe 510 threading connection 24mm overall diameter